I am using Samsung printer M2070. I think I bought it a long time ago, but I’m using it really usefully at home. Today, I need to print more than 10,000 pages, but if I print on only one side, the thickness of the paper will be considerable. sob
First of all, the model I had did not support the automatic duplex printing function, so I had to do manual duplex printing. After several attempts, I was able to print it the way I wanted…but I think I’ll forget it the next time I do it again, so I’ll organize it on my blog. Please refer to those who need it!
The way I wanted to print while printing the PDF file was to print two pages on one side as shown below, and on the back page, I wanted the pages to be printed front to back so that the text could be read in the same direction even if I flipped it sideways instead of turning it upside down. It was the way I hoped. It was harder to read if the top and bottom text were upside down when printed on two pages per side. 프린터 양면인쇄
So the way I got it after a few failures was to set it up as follows. After pressing the PDF print menu, select [Multiple] under Page scaling and processing, and set it to 2*1. The page order is landscape, and the duplex printing option is [Flip on Short Edge]. 윤과장의 소소한 일상 이야기
If you want a top-down method where you can read the text right away after setting up multiple pages of 2*1, select [Flip to Long Edge] to print backwards.
If you set the above settings, you will see the following message…
As mentioned at the beginning, it is not a model that supports automatic duplex printing, so after printing one side, the paper is moved manually to take a picture of the other side. it came out
When double-sided printing is set and printing on one side is finished.. As shown in the image on the left, a [Manual Feeding Status] message appears. When this message appears, first move the printed paper as it is… to the paper tray below!
If you press the [Start] button in the menu at the top of the printer, the back page will be printed out. It wasn’t a printer with bad specifications, so it didn’t take long. I thought it would be possible to print at 31%, but… it was a bit uneasy because the ink decreased faster than I thought… it was a moment. ^^;;;
In this way, you can easily complete double-sided printing through Samsung printers today! And I will try to organize the setting method and post it on the blog.
As for the point to be aware of here (?)…If you use a slightly thinner model, etc., sometimes two sheets of paper are inserted…In this case, in case of double-sided printing, when printing the next back page, the printout is pushed one by one. can occur Do not forget to flip the paper over in advance and then insert it into the feeder to prevent the papers from sticking together.
I also had to print 200 pages… so I printed it again… ㅜ So far, for those who want to do multiple printing and double-sided printing of PDF double-sided printing, we will summarize and upload the contents of the print setting method as above. If it is not multiple printing, it is necessary to check because the direction of flipping on long edge and flipping on short edge may be different.